Versatile Jet Pump Stimulation:
Versatile Flow Jet Pump Stimulation with Logging Objectives are: - initiate and accelerate well flow by depressing and repressing the reservoir for an indefinite length of time (forced oil production). - A well test is performed to evaluate the skin effect, reservoir pressure, and permeability degradation. - Logging the well using PLT/MPLT for flow rate, injectivity/productivity profile, pressure and temperature, water and oil zones, and perforated interval confirmation. - Long-term oil formation drainage and recording of the Pressure Decline/Build-up Curve - Fluid sampling while the fluid is flowing. - Determination of water encroachment. - Use the jet pump to perforate the well. - Acid stimulant. - Wells containing a large and heavy chemical content, as well as paraffin, glue, and sticky oil. - Selective treatment in distinct strata through the use of packers, acid, and the flow of the wells. - Injection/production wells, horizontal/vertical.
ISOGRAD V-JPS Distinguishing Features:
A variety of inserts available for logging, SRO or memory gauges, fluid sampling, acid treatment, and pressure testing of tubing and packers. For cost and time savings, various activities such as logging-testing-logging and logging-pumping-logging are performed without removing the pump out of the hole. No moving components and a simple design. The ability to work under a variety of difficult situations. Carrying out a chemical - acid treatment on the reservoir without lifting the pump, works for vertical and horizontal wells.
Hydromechanical Perforation:
ISOGRAD uses a safe perforation procedure that involves the use of fluids to perforate the wells. Its 2 metre depth approach is safe, dependable, quick, and cost effective. Hydro mechanical perforation objectives: Tight Groupings Previous perforated wells with lower production. New wells, Wells that are idle or dead. Injection wells. Prior to the use of hydraulic fracturing. Wells contain a lot of chemicals, paraffin, glue, and sticky oil. Oil-water contact and water-bearing layers .After squeezing the cement Prevent behind casing flow in cement wells with inadequate cement. Disposal of waste Packers, acid, and flow wells are used to selectively treat distinct strata. Perforation of horizontal wells, Can be used in an open hole if necessary.